引用本文:
【打印本页】   【HTML】 【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 937次   下载 660 本文二维码信息
码上扫一扫!
分享到: 微信 更多
变温热源内可逆布雷顿循环功率密度优化
郑军林1, 陈林根1, 孙丰瑞1, 贾野2
1.海军工程大学动力工程学院!湖北武汉430033;2.海军装备部机电公司!北京100841
摘要:
计入工质与高、低温侧换热器的热阻损失 ,用有限时间热力学方法 ,导出了变温热源条件下内可逆布雷顿循环功率密度与压比间的解析式 ,借助于数值计算 ,研究了高、低温侧换热器的热导率分配和工质与热源间的热容率匹配对最大功率密度的影响。
关键词:  热流计算  布雷顿循环  功率密度  参数最优化
DOI:
分类号:V231.11
基金项目:国家重点基础研究发展规划资助项目!(2 0 0 0 0 2 6 30 )
Power density optimization of an endoreversible brayton cycle coupled to variable-temperature heat reservoirs
Zheng Jun-lin1, Chen Lin-gen1, Sun Feng-rui1, Jia Ye2
1.School of Power Engineering, Naval Univ. of Engineering, Wuhan 430033,China;2.Corp. of Machinery and Electric, Dept. of Naval Equipment, Beijing 100841,China
Abstract:
The analytical formulas about the relations between power density and pressure ratio of an endoreversible Brayton cycle coupled to variable-temperature heat reservoirs were derived using finite-time thermodynamics. In the analysis, the irreversibilities involved the heat resistance losses in the hot- and cold-side heat exchangers. The influences of the thermal conductance distribution of hot-and cold-side heat exchangers and the thermal capacity rate match between the working fluid and the heat reservoirs were studied by the detail numerical examples.
Key words:  Heat flow calculation  Brayton cycle  Power density  Parameter optimization