引用本文:
【打印本页】   【HTML】 【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 95次   下载 58 本文二维码信息
码上扫一扫!
分享到: 微信 更多
电推进羽流粒子束溅射的蒙特卡罗模拟
商圣飞1,2,姜利祥1,2,李涛1,向树红1
1.北京卫星环境工程研究所,北京 100094;2.北京卫星环境工程研究所 可靠性与环境工程技术重点实验室,北京 100094
摘要:
为了研究电推进羽流对推力器及航天器造成的溅射腐蚀作用,采用蒙特卡罗方法对羽流等离子体对材料的溅射进行模拟,研究了溅射的级联碰撞机理,并开展了Xe离子正入射、斜入射Cu材料的溅射率、溅射产物的能量分布以及空间角分布的研究。结果显示,蒙特卡罗方法对溅射率和能量分布的计算结果与试验结果吻合较好,误差<30%,但是斜入射溅射率和方向分布吻合较差,最大误差>50%。认为影响溅射的主要因素为晶体的结构、二体碰撞的基本假设以及入射粒子的注入累积效应。
关键词:  推力器  电推进  羽流  溅射  碰撞  蒙特卡罗模拟  粒子束
DOI:10.13675/j.cnki.tjjs.200482
分类号:O484.1
基金项目:
Monte Carlo Simulation of Electric Propulsion Plume Particle Beam Sputtering
SHANG Sheng-fei1,2, JIANG Li-xiang1,2, LI Tao1, XIANG Shu-hong1
1.Beijing Institute of Spacecraft Environment Engineering,Beijing 100094,China;2.National key Laboratory of Science and Technology on Reliability and Environmental Engineering, Beijing Institute of Spacecraft Environment Engineering,Beijing 100094,China
Abstract:
To study the sputtering effects of the thrusters and spacecraft caused by electric propulsion plume, the Monte Carlo (MC) method is used to simulate the sputtering of materials by plume plasma. The cascade collision mechanism of sputtering was studied.The sputtering rates of Cu materials under normal and oblique incidence of Xe ions were investigated, and the sputtering rate, the energy distribution and the angle distribution of the sputtering products were studied. The results show that the calculation results of sputtering rate and energy distribution by MC method are in good agreement with the experimental results, but the oblique incidence sputtering rate and the angle distribution are in poor agreement. It is considered that the main factors affecting sputtering are crystal structure, the basic assumption of two body collision and the injection accumulation effect of incident particles.
Key words:  Thruster  Electric propulsion  Plume  Sputtering  Impact  Monte Carlo simulation  Particle beam