引用本文:
【打印本页】   【HTML】 【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 1387次   下载 757 本文二维码信息
码上扫一扫!
分享到: 微信 更多
AP包覆硼对富燃推进剂药浆流变特性的影响
魏青, 李葆萱, 邰红勤
西北工业大学航天工程学院 陕西西安710072
摘要:
用四种不同量AP包覆的硼粉,对硼含量达30%的富燃推进剂实验配方中的药浆流变特性进行了研究,结果表明:20%AP包覆硼粉的含硼富燃固体推进剂药浆的流变性与另三种硼粉的明显不同———近6h粘度为2 2kPa·s,屈服值在300Pa以下,表明其药浆流平性好并可满足浇铸要求。20%AP包覆硼的合适包覆量、包覆完整的表面性质及近似球型粒子的形状决定了其药浆的流变特性最优。
关键词:  含硼推进剂  贫氧富燃料推进剂  推进剂药浆  推进剂流变学
DOI:
分类号:V512
基金项目:航空科学基金资助项目 (0 0D53 0 3 7),;西北工业大学博士论文创新基金 (2 0 0 1 1 7)资助
Effect of boron coated with AP on the rheological properties of slurry of fuel-rich propellant
WEI Qing, LI Bao-xuan, TAI Hong-qin
Coll. of Astronautics, Northwestern Polytechnic Univ., Xi’an 710072, China
Abstract:
Four types of boron coated with AP on the rheological properties of the slurry containing 30% boron were investigated. The experimental results revealed that the rheological properties of the slurry of boron coated with 20% AP are obviously different from the others, of which the viscosity is 2.2 kPa·s and the yield value is smaller than 300 Pa after 6 h. This demonstrates that the slurry has a good fluidity and can be casted. The best rheologocal properties were ascribable to the appreciate amount of coating AP, the integrated surface of coated boron and the shape of global particle.
Key words:  Boron-based propellant  Oxygen-poor fuel-rich propellant  Propellant slurry  Propellant rheology