引用本文:
【打印本页】   【HTML】 【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 1322次   下载 630 本文二维码信息
码上扫一扫!
分享到: 微信 更多
中心进气和高位垂直进气转静系旋转盘冷却品质比较
徐国强, 詹治国, 丁水汀, 陶智, 罗翔
北京航空航天大学动力系!北京100083
摘要:
基于实验结果 ,对中心进气和高位垂直进气转静系旋转盘的冷却品质进行了较为系统的比较 ,结果发现 :虽然两者的盘面平均努赛尔特数和无量纲过余体平均温度相差很小 ,但是从减小径向温差角度看 ,高位垂直进气具有明显的优势 ,证明了以前提出的涡轮盘冷却指标应包含径向温差的合理性。
关键词:  涡轮盘  冷却  效率
DOI:
分类号:V235
基金项目:国家重点实验室基金资助项目!(96JS48 2 4 2ZS480 )
Comparision of cooling effectiveness between central and high positioned air inlet rotor stator disk systems
Xu GuoQing, Zhan ZhiGuo, Ding ShuiTing, Tao Zhi, Luo xiang
Dept of Jet Propulsion,Beijing Univ of Aeronautics and Astronautics,Beijing 100083,China
Abstract:
Cooling effectiveness was compared, based upon experimental data, between central(CP) and high positioned(HP) air inlet rotating disk systems It was found that the high positioned mode is better in reducing the disk radial temperature difference, though the differences of averaged Nusselt number and the averaged excessive body temperature are quite small between the two cases It was concluded that the radial temperature difference should be included in determining cooling effectiveness
Key words:  Turbine disk  Cooling  Efficiency