引用本文:
【打印本页】   【HTML】 【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 2317次   下载 1235 本文二维码信息
码上扫一扫!
分享到: 微信 更多
推进剂供应管路内液体瞬变流一维有限元计算
程谋森, 刘昆, 张育林
国防科技大学航天与材料工程学院!湖南长沙410073
摘要:
将液路计算中偏微分方程模型化成有限阶数的常微分方程组 ,由一维液体瞬变管流方程的特征线差分格式 ,提出了一种计算管腔互联结构形式的液体推进剂供应管路中瞬变流的一维有限元方法 ,它兼有特征线方法的特点。数值计算表明对单根等截面圆管阀门关断问题的计算结果与特征线方法计算结果吻合。利用本文方法计算了一个模型发动机的脉冲工况动态过程 ,取得了很好的效果。
关键词:  液体推进剂火箭发动机  推进剂输送  非定常流  特征线法  有限元法
DOI:
分类号:V421.42
基金项目:
One-dimensional finite element solutions for liquid transients in propellant feedlines
Cheng Mousen, Liu Kun, Zhang Yulin
Inst.of Aerospace and Material Engineering,National Univ. of Defence Technology, Changsha 410073,China
Abstract:
A one-dimensional finite element solution for liquid transients in propellant feedlines composed of vessels and ducts was derived. The solution was based on the difference scheme of characteristics and combined with the merits of finite element method. The calculated results for the approximation of valve closure problems show good agreement with that obtained by method of characteristics. The pulse mode of a model thruster was simulated with this solution, and the results were reasonable.
Key words:  Liquid propellant rocket engine  Propelant transfer  Unsteady flow  Method of characteristic  Finite element method