引用本文:
【打印本页】   【HTML】 【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 1276次   下载 641 本文二维码信息
码上扫一扫!
分享到: 微信 更多
温度与转速对涡轮叶尖径向间隙的影响
郭淑芬, 徐波
北京航空航天大学动力系!北京100083
摘要:
给出了考虑温度和转速影响的涡轮叶尖径向间隙的分析计算方法。用ANSYS有限元软件计算出涡轮叶尖径向间隙的时间历程变化趋势 ,其中叶盘径向位移主要考虑温度和转速的影响 ,机匣径向位移主要考虑温度的影响。该分析计算方法为进一步开展涡轮叶尖径向间隙主动控制的研究奠定一定的基础。
关键词:  涡轮  叶尖  间隙  控制  有限元法
DOI:
分类号:V231
基金项目:航空基础科学基金资助项目! (97C51 0 90 )
Effect of temperature and rotational speed on radial clearance of turbine blade tip
Guo Shufen, Xu Bo
Dept.of Jet Propulsion,Beijing Univ.of Aeronautics and Astronautics, Beijing 100083,China
Abstract:
The calculation method for radial clearance of turbine blade tip considering the effect of temperature and rotational speed is developed in this paper. The transient change of turbine blade tip clearance during the whole flight is computed by means of ANSYS finite element program. To calculate radial displacement the influence of temperature and rotational speed on the turbine and the effect of temperature on the case are considered. The methodology presented in this paper can lay some foundations for further study to control radial clearance of turbine blade tip.
Key words:  Turbine  Blade tip  Gap  Control  Finite element method