引用本文:
【打印本页】   【HTML】 【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 2579次   下载 1307 本文二维码信息
码上扫一扫!
分享到: 微信 更多
对转压气机数值模拟及实验研究
刘波, 陈云永, 项效镕, 侯为民
西北工业大学动力与能源学院/翼型叶栅空气动力学国防重点实验室
摘要:
以设计的某对转压气机试验台为研究对象,分别应用数值模拟和试验手段对设计转速、典型工作状态下压气机性能和流场细微结构进行了研究。计算结果表明:压气机压比特性与试验值吻合较好,计算效率较试验值偏高;在近失速点压气机第二排转子叶片吸力面近尖部10%叶展范围内,最先出现导致叶片失速的大范围分离和低能堵塞团;第一排转子叶片尖部尾缘处附面层较厚并伴随有分离现象,使得下游叶片来流发生较大畸变。
关键词:  对转技术+  压气机  数值仿真  试验研究
DOI:
分类号:V231.3
基金项目:航空支撑基金(04B53007)
Experimental and numerical investigation of dual stage counter-rotating compressor
LIU Bo, CHEN Yun-yong, XIANG Xiao-rong, HOU Wei-min
School of Power and Energy/National Defence Key Lab.of Airfoil and Cascade Aero-dynamic,Northwestern Polytechnical Univ.,Xi′an 710072,China
Abstract:
The performance and detailed flow structure of a counter-rotating compressor under design rotating speed and typical working condition were experimentally and numerically investigated.Numerical results show preliminarily that the total pressure ratio performance agreed with experimental data well,while the numerical peak efficiency was little higher than experimental one.The flow separation and great range low energy flow occur at the 10% span range of second rotor blade tip near stall point firstly,which was the main reason for the compressor stall.The second rotor worked at a large incidence angle(>5°) because of the separation at rotor one trailing edge.
Key words:  Counter-rotating technique+  Compressor,Performance curve  Experiment investigation