引用本文:
【打印本页】   【HTML】 【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 1380次   下载 761 本文二维码信息
码上扫一扫!
分享到: 微信 更多
高负荷缝隙弯曲扩压叶栅尾迹特性实验
陈浮, 陈焕龙, 冯冬民
哈尔滨工业大学能源科学与工程学院
摘要:
实验研究了设计冲角下压气机采用带切向缝隙大转角弯曲叶片对叶栅出口尾迹特性的影响,结果表明,切向缝隙射流能够有效地改善高负荷扩压叶栅的尾迹低速、低总压特性,减少尾迹高熵流体的加入以及尾迹亏损,从而降低了栅后总损失。
关键词:  压气机  叶栅  尾迹亏损+  缝隙叶片+  射流
DOI:
分类号:V231.3
基金项目:高等学校博士学科点专项科研基金项目(20060213007);哈尔滨工业大学优秀青年教师培养计划项目(HITQN-JS.2006.046)
Experiment on wake characteristics in compound lean compressor cascades with slots injection
CHEN Fu, CHEN Huan-long, FENG Dong-min
School of Energy Science and Engineering,Harbin Inst.of Technology,Harbin 150001,China
Abstract:
The influence of wake characteristics with 60° turning angle plane compound lean compressor cascades,which was set tangent air injection slots,was investigated.The experimental results show that not only the characteristics of low velocity and total pressure in wake were improved effectively,but also the wake deficit and high entropy fluid intruded wake were decreased by tangent air injection.Thus,total flow loss in the outlet of cascades was reduced.
Key words:  Compressor  Cascades  Wake deficit+  Slot blade+  Injection