引用本文:
【打印本页】   【HTML】 【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 1326次   下载 704 本文二维码信息
码上扫一扫!
分享到: 微信 更多
液体工质激光推进冲量耦合系数实验测试
李修乾1,2, 洪延姬2, 崔村燕1,2, 文明2, 何国强1
1.西北工业大学航天工程学院陕 西西安710072;2.装备指挥技术学院 北京101416
摘要:
在成功研制液体工质注入系统的基础上,以脉冲式CO2激光器为光源,将雾化水滴用作工质,进行了激光推进性能实验测试研究。实验发现水工质激光推进冲量耦合系数较大气吸气模式获得了较为明显的提高,达到了50×10-5N.s.J-1左右。与国内外相关实验结果进行了对比分析,讨论了提高液体工质激光推进性能参数的方法。
关键词:  激光推进  工质注入系统+  雾化  耦合系数
DOI:
分类号:V439
基金项目:国家“九七三”项目(61328)
Measurements of impulse coupling coefficient for laser propulsion with liquid propellants
LI Xiu-qian1,2, HONG Yan-ji2, CUI Cun-yan1,2, WEN Ming2, HE Guo-qiang1
1.Coll.of Astronautics,Northwestern Polytechnical Univ.,Xi’an 710072,China;2.Inst.of Equipment Command and Technology,Beijing 101416,China
Abstract:
A CO2 laser was employed to ablate water droplets provided by a pulsed liquid propellant feeding system.Experimental results indicate that momentum coupling coefficient Cm is increased to 50×10-5N·s·J-1,which is higher than that of air-breathing mode laser propulsion.The measurement data were compared to the results of other authors.The way to improve the performance parameters of laser propulsion with liquid propellants was discussed.
Key words:  Laser propulsion  Propellant feeding system+  Atomization  Coupling coefficient