引用本文:
【打印本页】   【HTML】 【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 1508次   下载 687 本文二维码信息
码上扫一扫!
分享到: 微信 更多
低速条件下稠度对扩压静叶栅弯叶片流场性能的影响
张永军1, 颜培刚1, 马岩1, 黄家骅2,3, 冯国泰1, 苏杰先1
1.哈尔滨工业大学能源科学与工程学院 黑龙江哈尔滨150001;2.二炮驻31所代表室;3.北京100074
摘要:
为研究弯叶片在扩压叶栅中改善流场性能的适用条件,对一直列叶栅三种稠度条件下的弯叶片流场进行了数值模拟。结果表明,稠度大小对弯叶片的作用影响较大,在一定范围内稠度越大弯叶片改善叶栅性能的作用越明显。大稠度下弯叶片明显提高了叶栅吸力面角区的通流能力及减小了端区的能量损失。分析表明,大稠度叶栅近端壁低能流体区较大而导致的端壁及吸力面角区性能恶化,是弯叶片能够发挥作用的重要原因。
关键词:  压气机  低速  稠度  扩压叶栅+  弯叶片
DOI:
分类号:V231
基金项目:国家自然科学基金(50236020)
Influence of solidity on flow field performance of bowed stator in compressor at low speed
ZHANG Yong-jun,YAN Pei-gang,MA Yan,HUANG Jia-hua,FENG Guo-tai,SU Jie-xian
1.School of Energy Science and Engineering,Harbin Inst.of Technology,Harbin 150001,China;2.The Second Artillery Representative Office in the 31~(st) Research Inst.,Beijing 100074,China
Abstract:
To understand application condition for bowed blade to improve compressor performance,a numerical investigation on flow field of bowed stators with three series of solidity was carried out.The numerical value of solidity affects the action of bowed blade greatly and the solidity with higher value influences greater.The flow capacity is strengthened and energy loss is reduced near suction corner for bowed blade with high solidity.A possible reason for the action of bowed blade with high solidity is deterioration of performance caused by accumulation of low energy fluid near suction/end-wall corner.
Key words:  Compressor  Low speed  Solidity  Compression stator~+  Bowed blade