| 摘要: |
| 用CFD软件(FLUENT6.0.12)对预旋进气的盘腔进行了数值模拟,计算中采用了多种湍流模型,包括Spalart-Allmaras单方程、K-epsilon和K-omega多种双方程模型,结果表明Spalart-Allmaras模型与结果符合得较好;通过计算研究了流场结构,流场主要由两个参数旋转比β_p和湍流参数λ_T控制,λ_T主要决定源区的大小,计算结果验证了自由涡流的存在,并且盘腔压力分布的计算值与理论曲线符合得很好。 |
| 关键词: 旋转盘腔 涡轮盘 湍流模型 流动分布 数值仿真 |
| DOI： |
| 分类号:V232.3 |
| 基金项目: |
|
| Numerical investigation on preswirl flow in rotating disc system |
|
BAI Luo-lin, FENG Qing, LIU Song-ling, BU Qi-long
|
|
Dept. of Aeroengine Engineering, Northwestern Polytechnical Univ. , Xi’ an 710072, China
|
| Abstract: |
| The flow in preswirl rotor-stator system was analyzed and simulated using a CFD code (FLUENT6.0.12) . Different turbulence modeb were adopted in computation including Turbulence Spalart-Allmaras,K-epsilon,and K-omega. Among these, Spal-art-Allmaras model standed out as a better solution. The flow structure was mainly controlled by two parameters swirl ratioβp and turbulence parameterλT , by which the range of source region was determined. The results demonstrate the existence of free vortex. The distributions of pressure by computing agree well to the theory. |
| Key words: Rotating disk cavity Turbine wheel Turbulence model Flow distribution Numerical simulation |
