引用本文:
【打印本页】   【HTML】 【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 1340次   下载 641 本文二维码信息
码上扫一扫!
分享到: 微信 更多
预测轴流压气机工作稳定性的非线性模型
张明川1, 唐狄毅2
1.北京航空航天大学动力系;2.西北工业大学航空动力与热力工程系
摘要:
建立了预测轴流压气机工作稳定性的非线性模型,采用有限差分数值模拟单转子和一台三级轴流压气机旋转失速的形成和发展过程,预测失速特征参数。由于合理地考虑了失速流动的非定常和非线性因素的影响,大多数失速特征参数的预测结果与试验测量值相符。
关键词:  轴流式压缩机  旋转失速  失速特性  数值仿真
DOI:
分类号:V235.113
基金项目:
A NONLINEAR MODEL FOR INSTABILITY PREDICTION OF AXIAL FLOW COMPRESSORS
Zhang Mingchuan,Tang Diyi
Dept.of Aeroengine,Northwestem Polytechnical Univ ,Xi′an,710072
Abstract:
A nonlinear,two dimension,compressible dynamic model of instability prediction of axial flow compressors was described.The flow dynamics were presented by unsteady Euler equations and semi empirical correlation.The development of stall cell and the characteristic parameters of rotating stall in a single rotor and a three stage axial flow compressor were simulated by numerical method.Most of the simulation results agree well with the experimental data
Key words:  Axial flow compressor  Rotating stall  Stalling characteristic  Numerical simulation